ABS-300 ABSOLUTE HUMIDITY SENSOR range 0 to 130 g/m3 with an output of 0-13 mV. IDEAL FOR HARSH ENVIRONMENT. Thermal conductivity, operation from 25°C to 200°C, Condensation proof. Immune to chemical vapors. Aluminum sensor housing and over braided shielded cable in twenty eight inch or fifteen foot lengths.

UPS-500 RESISTIVE TYPE HUMIDITY SENSOR. Non-condensing environments. Excitation voltage 1 VAC @ 33 Hz to 10 KHz. Range of operation 20 - 90 % @70 °F 2%, temp. -4 to +140°F. Reverse logarithmic output. Available as signal conditioner and sensor SC-500.

UPS-600 "WATERPROOF" RESISTIVE TYPE HUMIDITY SENSOR. For condensing environments. Excitation voltage 1 VAC @ 33 Hz to 10 KHz. Range of operation 20 - 90 % @70°F 2%, temp.+32 to +122°F. Reverse logarithmic output. Available as signal conditioner and sensor the SC-600.

HS-Series NARROW RANGE RESISTIVE TYPE HUMIDITY SENSOR. 1% accuracy. Excitation voltage 1 - 6 @ 33 Hz to 33 KHz. Temp 0 to 160°F. Eight sensors over a range of .7 to 99% RH. Use with the HCL/SC signal conditioner or controller card.

SC-500 LINEAR OUTPUT SIGNAL CONDITIONER with RESISTIVE TYPE HUMIDITY SENSOR. Non-condensing environments. Excitation voltage 150 mV RMS @ 3.8 KHz. Range of operation 20 - 90 % @70 °F 2%, temperature -4 to +140°F. Requires a 5 volt DC regulated power supply.

SC-600 LINEAR OUTPUT SIGNAL CONDITIONER with RESISTIVE TYPE HUMIDITY SENSOR. For condensing environments. Excitation voltage 150 mV @ 44 Hz. Range of operation 20 - 90 % @70°F 2%, temp. +32 to +122°F. Requires a 5 volt Dc regulated power supply.

SC-600E RESISTIVE TYPE HUMIDITY SENSOR WITH SEALED ELECTRONICS. Replaceable sensor. Linear output, 5 VDC regulated supply voltage required . Range of operation 20 - 90 % @70°F 2%, temp. +32 to +122°F. 3 foot shielded sensor cable. Used in ethylene oxide and other gas environments.