Home   |    Products   |    About Us   |    News   |    Contact Us   |    Service Return Form  |  Obsolete Documents  |   Shop Online

Accessories & Replacement Parts

These are accessories and replacement parts for OHMIC Instruments' ultrasound power meters, dew point meters, humidity sensors and more.

AMM-15 Accessory Kit

This is the standard Accessory Kit that comes with the AMM-15 Dew Point Meter. It contains the following:

1 - Vinyl Case
1 - Battery Set - (4 - AA)
1 - Filter - In-Line, 1/4", .01 Micron
1 - Tubing - 3/16 ID, Vinyl, 3', w/ Brass "L"
1 - Tubing - 1/16" ID, Nylon, 5', w/ Union
1 - Bleed Plug Assembly
1 - Cable - RS-232 (3.5 mm Stereo to DB-9)
1 - Cable - DC Output (3.5 mm Stereo to unterminated)
1 - CPC Coupler - Male
1 - CPC Coupler - Female
1 - Union - 1/4" push-in

Cable - USB - USB

 Communications cable (83032108) for connecting SP series scales to computers with USB input ports. The cable has a custom connector box on the scale end and a USB (A) connector on the computer end. The SP Series of scales are used in the UPM-DT-50SP Ultrasound Power Meter. Installation requires that the UPM be partially disassembled.

In-Line Filter

The 5355 is an In-Line Filter for the AMM-15 Dew Point Meter..

Calibration Weight

A one gram Calibration Weight (53001) used as a quick check for all UMP Series Ultrasound Power Meters. One is supplied with each new unit. Produces an output of 14.65 watts.

Power Supply

Universal Power Supply (BC20-21113) (100-240V input) comes with adapters for USA, Europe(Schuko), U.K. and Australia.

Suitable products:

UPM-DT-1000PA, UPM-DT-1PA, UPM-DT-10PA, UPM-DT-100SP, UPM-DT-50SP, USP-50SP, USP-100A.

Transducer Holder & Clamp

The BC80-00677 is a transducer holder and clamp for the UPM-30 and the USP-30.

Cable - RS-232 to DB-9

 RS-232 Comm. Cable (83032107) for connecting SP series scales to computers with DB-9 input ports. The cable has a custom connector box on the scale end and a DB-9 connector on the computer end. The SP Series of scales are used in the UPM-DT-50SP Ultrasound Power Meter. Installation requires that the UPM be partially disassembled.

Battery Eliminator

Battery Eliminator (BC20-21116)(110VAC/6 VDC, 1 amp) is used with the AMM-15. (Replacement)

Multipurpose Holder/Positioner

The MHP-200 is a Standalone ball joint mult-purpose Holder/Positioner. It uses the same ball joint arm as the current UPM, but provides it on it's own stand, so the device under test may be held independent of the UPM clamping system.

Cable - RS-232 to DB-9

 RS-232 Comm. Cable (80500525) for connecting AV series scales to computers with DB-9 input ports. The AV Series of scales are used in the UPM-DT-1PA, UPM-DT-10PA and UPM-DT-100SP Ultrasound Power Meters.

Multipurpose Holder/Positioner

The MHP-101 is a multi-purpose holder/positioner for older UPM designs. It allows the new ball joint positioner to be retro fitted to the older models.

Multipurpose Holder/Positioner

The MHP-102 is the ball joint multipurpose Holder/Positioner used on current model UPM-DT's.